Site | Preheating temperature | Curing | VisCalor (nā=ā10) | Admira (nā=ā10) | P-value | ||
---|---|---|---|---|---|---|---|
Mean | SD | Mean | SD | ||||
Pulpal floor | 50Ā Ā°C | Base line | 31.6 | 1.19 | 31.6 | 1.04 | 0.931 |
Before curing | 34.3 | 0.97 | 32.66 | 1.11 | 0.002* | ||
After curing | 37.41 | 0.96 | 35.57 | 2.18 | 0.020* | ||
70Ā Ā°C | Base line | 32.5 | 0.81 | 32.2 | 1 | 0.601 | |
Before curing | 35.25 | 1.36 | 34.3 | 1.02 | 0.067 | ||
After curing | 36.53 | 1.61 | 38.04 | 1.8 | 0.054 | ||
Composite surface | 50Ā Ā°C | Before curing | 32.53 | 0.86 | 31.93 | 1.12 | 0.129 |
After curing | 33.39 | 0.8 | 33.22 | 0.96 | 0.661 | ||
70Ā Ā°C | Before curing | 33.3 | 0.51 | 32.43 | 0.85 | 0.031* | |
After curing | 33.74 | 0.86 | 33.92 | 0.82 | 0.643 |